Home About Us Products News Center Services Contact Us
You are here : Home >> Products
PRODUCTS
Veterinary Medical Equipment
Patient Monitor
> 5 inch patient monitor
> 8 Inch Patient Monitor
> 12.1 Inch Patient Monitor
> 15 Inch Patient Monitor
Vital Sign Monitor
Pulse oximeter
ETCO2 Monitor
ECG Machine
Chemistry Analyzer
Hematology Analyzer
Ultrasound Scanner
Digital Color Doppler
Fetal Doppler&Fetal Monitor
Reusable SPO2 sensor
Spo2 Extension Cable
Disposable SPO2 sensor
One Piece ECG cable
ECG/EKG cable with leads
Temperature probe
IBP cable
NIBP cuff with tubes
EKG Electrodes
Modules
Others
Service Hotline
0086-755-23247025
Patient Monitor
ET300
External Sidestream EtCO2 Sensor
Details:
Product Introduction
ET300 is an external plug and play sidestream co2 sensor. It does not occupy any host space and connects to host just with one eight-pin plug. ET300  features cutting-edge technology for measurement of instantaneous CO2 concentration, respiration rate, end-tidal CO2 concentration, inspired CO2 concentration, inspiration time and expiration time. It is generally used in patient monitor and anesthetic machine. With a sampling rate low to 50 mL/min, it is ideal for use on adult, pediatric and infant patients; patients undergoing procedural sedation; and short- term monitoring of intubated patients.
 
 
Product Features
State-of-the-art Non-dispersive infrared (NDIR) technology, dual wavelength, no moving parts
Breath-by-breath CO2 monitoring
Sample rate low to 50 mL/min
Barometer pressure and temperature compensation
Range calibration in 0 – 15% by manufacturer
Fast warmup time ensures full accuracy within 5 minutes
Oxygen, N2O and anesthetic compensation for accurate measurement
Low power consumption less than 2W
Fully compatible with Respronics Loflo sensor module
 
Technical Specifications
Transducer Type
ET300  Sidestream CO2 sensor
Sample Rate
50 mL/min, ±10mL/min.
Principle of Operation
Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts
Initialization Time
Capnogram displayed in less than 5 seconds
Reaching full specifications within 10 minutes.
CO2 Measure Range
0 - 114 mmHg
0 - 15%
0 - 15.2kPa
CO2 Resolution
0.1 mm Hg      0 to 50 mm Hg
0.25 mm Hg     50 to 114 mm Hg
CO2 Accuracy
0 – 40 mmHg    ±2 mmHg
40 – 114 mmHg  ±5% of reading
Respiratory Rate
Range          2 to 120 Breaths Per Minute (BPM)
Accuracy       ±1 breath
Calibration
No routine user calibration required
Compensation
Automatic Barometer Pressure 400 - 800 mmHg.
User selectable O2 / N2O compensation.
Voltage Requirements 
5.0 VDC  5%
Power Consumption
Less than 1.5 Watts typical.
Temperature and Humidity
Operating: 0º to 40ºC, 10 to 90% RH, non-condensing
Storage:  -40º to 70ºC, <90% RH, non-condensing
Interconnection
Pin out:
1.  VA             5.0V
2.  Shield      Shield
3.  DGND      Digital return
4.  VSRC       Unused
5.  TxD           Serial data from LH800 
6.  RxD           Serial data from Host
7.  AGND       Analog return
8.  SYNC        Unused
Data Interface
 RS232, bi-directional, 19200 baud rate, standard N-8-1
Fully compatible with Respironics LoFlo communication protocol
Data Output
CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate,  Automatic barometric pressure compensation.
About us   |   Products   |    News center   |    Services   |    Contact us
Copyright © 2006-2017  RONSEDA ELECTRONICS CO.,LTD
Hotline: 0086-755-23247025
Email: [email protected]